How to find HBA parameters and drivers Print

  • how to hba module load list
  • 2


Verify which HBA module is currently loaded by entering one of these commands on the service console:

 

For QLogic:

 

# esxcli system module list | grep qla

 

For ESXi 5.5 QLogic native drivers:

 

# esxcli system module list | grep qln

 

For Emulex:

 

# esxcli system module list | grep lpfc

 

For Brocade:

 

# esxcli system module list | grep bfa

 

To check the parameters of the driver

esxcli system module parameters list -m qlnativefc

 

Change the qlogin native driver

esxcli system module parameters set -p ql2xmaxqdepth=255 -m qlnativefc

esxcli system module parameters set -p ql2xloginretrycount=60 -m qlnativefc

esxcli system module parameters set -p qlport_down_retry=60 -m qlnativefc


Was this answer helpful?

« Back